Greetings
And before anything thanks for the great ressources. I am testing an arduino uno on a 704 addressable led strip. The connections of all the 704 leds work fine with a symphony controller. When I connect everything on the arduino uno board according to your instructions I can only get 610 led working. Any number above that and the program does not run. I have tried several programs and the limit is always the same.
Here is the setup
– 26 amp power adapter
– arduino uno with data on pin 6, grd and 5 v connection.
– every 88 led I have a direct grd and 5v line to the power adapter
– I use a 470Ω resistor on the breadboard on the data line.
Have I reached a limit for the arduino processor or there anything wrong in my setup?
Thanks a lot in advance